Product Center
Product center
Quanta-DNSM20S
SIL3 PLe TUV CE EAC CCCSIL3 PLe TUV CE EAC CCC
Product advantage
Edge carpet/High Grade / 2NO (instantaneous)
Product characteristics
Support resistance, normally open, normally closed contact side/carpet, 4-wire contact side/carpet signal input；
Supports dual-channel, single-channel-dual-channel, and single-channel-single-channel modes；
Supports automatic reset and manual reset；
Support independent channel status signal output；
2NO: supports three auxiliary signal outputs；
Monitoring short circuits between independent channels.
- Parameters
Product advantage
Edge carpet/High Grade / 2NO (instantaneous)
Product characteristics
Support resistance, normally open, normally closed contact side/carpet, 4-wire contact side/carpet signal input；
Supports dual-channel, single-channel-dual-channel, and single-channel-single-channel modes；
Supports automatic reset and manual reset；
Support independent channel status signal output；
2NO: supports three auxiliary signal outputs；
Monitoring short circuits between independent channels.
Power | ||
Power supply | 24V DC | |
Tolerance | +15% /-20% | |
Power dissipation | ≤1.4W | |
Output | ||
Relay output | 2NO (instantaneous) | |
Auxiliary output | 3 channels, <200mA 24VDC | |
Relay contact capacity | ||
AC-1 | 4A/250VAC/1000VA | |
AC-15 | 0.85A/250VAC | |
DC-1 | 4A/24VDC/100W | |
DC-13 | 2A/24VDC | |
Contact resistance | ＜100mΩ | |
General parameters | ||
Electrical lifespan | 5×105times | |
Mechanical lifespan | 1×107times | |
Operating temperature | -25℃~65℃ | |
Level of Protection | Shell IP30, terminal IP20, recommended to be installed in the cabinet or shell IP54 | |
Shell material | PA66, V0 flame retardant | |
Dimensions | 114mm×108mm×17.5mm | |
Safety standards | ||
PL Performance level | EN ISO13849-1:2015 | PLe |
Category | EN ISO13849-1:2015 | Cat.4 |
SIL CL | EN62061:2021 | SIL CL3 |
Compliance | EN 60947-1 EN 60947-5-1 IEC 60664 IEC 61508 IEC 61000 IEC 61326 IEC 60925 IEC 60068 EN ISO 13849-1 EN ISO 13849-2 EN 62061
| |
Compliance | ||
DNSM20S | 01011701104 | |
- Used to monitor various safety components, such as emergency stops, door locks, contact edges, etc.
- Form an independent safety monitoring system outside the functional system of the equipment.
- Real-time monitoring of equipment safe operation and employee compliance.
- Prevent harmful actions caused by illegal operations, poor contact, and aging of equipment, and protect equipment and personnel in a timely manner.
Applicable industry:
- Injection molding machine, CNC machine tool
- Press/hydraulic press, glass machinery, filling machinery, packaging machinery
- Sorting machinery, woodworking machinery, papermaking machinery
- Intelligent forklift, AGV, robot, elevator
- Wind power, SIS system, etc
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
INQUIRY
Add Successfully
Copyright © 深圳市多恩技术有限公司 All Rights Reserved. 备案号：粤ICP备17015015号
